Description

AUTOOL HTS705 Dry ice blasting machine is a cleaning machine applied in the field of automotive servicing, in which the dry ice particles are accelerated by the airflow at high speed to remove the carbon buildup. The cleaned dry ice will vaporize in the ambient, which is safe and residue-free and will not damage the vehicle. It can be used for the cleaning of carbon deposits in the engine compartment, cylinder combustion chamber, intake valve, throttle valve, and etc. Why choose the AUTOOL HTS705 Automotive Dry Ice Cleaner? The AUTOOL HTS705 Automotive Dry Ice Cleaner uses dry ice particles to quickly and efficiently remove stains, grease, and carbon from automobile surfaces. The cleaning results are highly efficient and thorough. This method is environmentally friendly as it does not produce harmful waste water or exhaust gas. The cleaner's design prioritises the user experience. The control panel is simple and intuitive, making it easy to operate. Users can achieve personalised cleaning solutions through simple settings and adjustments. This equipment has become the preferred choice for automotive cleaning due to its high efficiency, environmental friendliness, ease of use, versatility, durability, and stability. It is widely used in automotive repair shops and other car cleaning facilities. Q & A: 1. Require air compressor? Dear customer, please check your air compressor specification before purchase, the air pressure must be 6bar or higher, the storage tank must be 300L, and the power of air compressor is 7.5KW 2. How to connect my device to the air compressor? The kit includes an air connection hose that connects to the compressor in 1/2 size. Please note that you must connect this air hose directly to your compressor, the use of additional adapters is prohibited! 3. Does it produce its own dry ice? Where do I get dry ice? No, it does not produce dry ice. You will need to purchase dry ice from your local market. 4. What is the size of the dry ice pellets? The size of dry ice pellets used in this machine is 3mm, please use the equipment strictly according to the requirements of this equipment. ECO-FRIENDLY & SAFETY Dry ice is a non-toxic substance that will sublimate and gasify without any secondary waste residue; no reagents, no chemical components, and no secondary pollution concerns; it is eco-friendly that will keep equipment safe and avoid harm to personnel. HIGH-EFFIGENGY CLEANING It can fully clean the carbon deposits in all parts of the car without disassembling the cleaning parts. This effectively reduces the cleaning time and gr eatly improves efficiency. WIDELY USED Dry ice blast cleaners are widely used in fields such as rubber, casting, automobiles, ships, electric power, chemicals, printing, plastics, food, pharmaceuticals, and aviation. CONTROL PANEL The control panel is internally designed with an intelligent microcomputer for precise pressure control. Users can according to different cleaning needs adjustable air pressure and dry ice injection volume Operating Instructions Equipment debugging Connect the host to the external air source and external power supply. Check whether the data of the air pressure indicator is normal and whether the power connection is normal (make sure the power supply is grounded normally). Make preparations for testing machine, including connecting the machine and accessories properly, checking whether the parts are loose, and cleaning the unnecessary items placed on the machine body or the work area. Turn on the power switch, then turn it to start mode first. And then press the start switch on the handle to run, adjust the dry ice volume from 0 to its maximum, check whether there is any abnormality, and then put dry ice materials into the machine for trial operation. Adjusting the volume of dry ice blasting Add an appropriate volume of dry ice and cover the lid. According to the required cleaning degree, turn the dry ice volume adjusting controller to achieve the best effect as needed (it is recommended to set it to “5” first and adjust it according to the cleaning effect). If the barrel with smaller inner diameter is adopted, it is recommended to set it to “3” and then increase it as appropriate. After confirmation, align the spray gun with the parts to be cleaned, and press the start switch on the handle to enter the cleaning procedure. Final work Turn the dry ice volume adjusting controller to “0” and start the spray gun to spray for 30-50s until no water is sprayed. The dry ice residue can be removed by extending the product’s spraying time, and manual cleaning is required if necessary. Turn off the power switch, disconnect the air source, and store the spray gun and accessories. Package details 1pc* AUTOOL HTS705 Dry Ice Blasting machine main unit 1pc* Intake hose (Connect to external air source) 1pc* Ice outlet pipe (With signal line and switch) 2pcs* Fuses 1pc* Gloves 2pcs* Ground clip wire 1pc* Ground wire connector 4pc* Ice spray nozzle 1pc* Ice shovel 1pc* Safety goggles 1pc* Earplugs 1pc* User manual MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY Delivery Details MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY Delivery Details